|
Introduction
Electric instantaneous water heater,
hydraulically controlled with tubular heating system for supplying hot water
between approx. 35 °C and 55 °C to one or two points of use. The appliance
automatically switches on when the required minimum flow pressure is exceeded
and transfers its thermal energy to the water flowing through. The temperature
of the hot water can be influenced via the draw-off fitting by increasing or
decreasing the flow rate. A thermal cutout protects the appliance against
overheating.
Description:
- Compact, hydraulically controlled instantaneous water heater
- Tubular heating element in copper tank
- Closed-outlet (pressure-type) design with safety temperature limiter and monitor
- Integrated shutoff valve with easy-to-service strainer and flow control
- Variable electrical connections
- Variable water connection for surface-mounted or flush-mounted installation
| Specifications: |
| Capacity: |
0.2 Liter |
| Type of system (max. static pressure): |
pressure type, 6 bar |
| Heating System: |
tubular heating element |
| Nominal rating/-loading at 1/N/PE ~ 220V: |
6.0 kW/27.3 A |
| Nominal rating/-loading at 1/N/PE ~ 230V: |
6.6 kW/28.7 A |
| Nominal rating/-loading at 1/N/PE ~ 240V: |
7.2 kW/30.0 A |
| Required cable minimum: |
3 x 4.0 mm² |
| Switch-on flow at cold temp up to 15/30°C: |
2.9/3.6 l/min |
| Switch-off flow at cold temp up to 15/30°C: |
1.9/2.7 l/min |
| Pressure loss at flow |
0.3 bar @ 3 l/min |
Maximum temp rise at nominal rating 230V and
flow of 2 l/min:
flow of 4 l/min:
flow of 6 l/min:
flow of 8 l/min:
flow of 10 l/min:
|
-
24°C
16°C
12°C
-
|
| Suitable for areas with cold water temps up to: |
15°C/30°C |
| Water connection: |
G 1/2" for concealed or above work surface |
| Weight: |
2.1 kg |
| Dimensions (H x W x D): |
33 x 21 x 11cm |
| Class / Degree of protection (IEC 529): |
1 / IP 25 |
|
