|
Introduction
Hydraulically controlled
instantaneous water heater with tubular heating system and shower set for
supplying hot water to a shower. The appliance is conveniently switched on and
off via the On/Off knob. The required hot-water temperature is set via the flow
rate and heating power. The heating power can be switched off and set to three
different levels on the upper knob, while the flow rate is adjusted by means of
the middle knob. A thermal cutout prevents overheating.
Description:
- Hydraulically controlled instantaneous water heater for showers
- Tubular heating system in copper tank
- Open-outlet design
- Power switch: Full - 2/3 - 1/3 - Off
- Flow control knob
- Knob for conveniently switching on and off
- Variable electrical connections
- Variable water connection for surface-mounted or flush-mounted installation
- Shower set with multi-position hand set, wall rail and shower hose
| Specifications: |
| Capacity: |
0.2 Liter |
| Type of system (max. static pressure): |
non-pressure, 0 bar |
| Heating System: |
tubular heating element |
| Nominal rating/-loading at 1/N/PE ~ 220V: |
2.7 kW/12.3 A |
| Nominal rating/-loading at 1/N/PE ~ 230V: |
3.0 kW/13.0 A |
| Nominal rating/-loading at 1/N/PE ~ 240V: |
3.3 kW/13.8 A |
| Required cable minimum: |
3 x 2.5 mm² |
| Switch-on flow pressure: |
3 l/min |
| Required water pressure |
1 bar/ 14.5 psi (running) - 6 bar/ 87 psi (static) |
Maximum temp rise at nominal rating 230V and
flow of 4 l/min:
flow of 5 l/min:
flow of 6 l/min:
flow of 7 l/min:
flow of 8 l/min:
|
11°C
9°C
7°C
6°C
5°C
|
| Suitable for areas with cold water temps of: |
28 - 30°C |
| Water connection: |
G 1/2" for concealed or above work surface |
| Weight: |
2.5 kg |
| Dimensions (H x W x D): |
33 x 21 x 11cm |
| Class / Degree of protection (IEC 529): |
1 / IP 25 |
|
