|
Introduction
Electronically controlled instantaneous water heater with tubular heating
system and shower set for supplying hot water at a precise temperature between
30 °C and 45 °C in a shower. The required temperature can be set by means of two
touch keys. The heating power is controlled electronically in order to keep the
hot water at a constant temperature. The appliance is conveniently switched on
and off via an On/Off knob. The flow rate can be adjusted by means of the flow
control valve if necessary.
Description:
- Electronically controlled instantaneous water heater for showers
- Tubular heating system in copper tank
- Open-outlet design
- Heating power controlled electronically in accordance with feed temperature and flow rate
- Control panel with LED indicator for temperature selection Cold and 30 °C – 45 °C
- Flow control knob
- Knob for conveniently switching on and off
- Variable electrical connection
- Variable water connection for surface-mounted or flush-mounted installation
- Shower set with multi-position hand set, wall rail, soap dish and shower hose
| Specifications: |
| Capacity: |
0.2 Liter |
| Type of system (max. static pressure): |
non-pressure, 0 bar |
| Heating System: |
tubular heating element |
| Nominal rating/-loading at 1/N/PE ~ 220V: |
2.7 kW/12.3 A |
| Nominal rating/-loading at 1/N/PE ~ 230V: |
3.0 kW/13.0 A |
| Nominal rating/-loading at 1/N/PE ~ 240V: |
3.3 kW/13.8 A |
| Required cable minimum: |
3 x 2.5 mm² |
| Switch-off flow: |
2.0 l/min |
Maximum temp rise at nominal rating 230V and
flow of 4 l/min:
flow of 5 l/min:
flow of 6 l/min:
flow of 7 l/min:
flow of 8 l/min:
|
11°C
9°C
7°C
6°C
5°C
|
| Suitable for areas with cold water temps up to: |
28 - 30°C |
| Temperature control: |
Cold and 30 - 45°C |
| Water connection: |
G 1/2" for concealed or above work surface |
| Weight: |
2.2 kg |
| Dimensions (H x W x D): |
33 x 21 x 11cm |
| Class / Degree of protection (IEC 529): |
1 / IP 25 |
|
