|
Introduction
Electronically controlled instantaneous water heater with
tubular heating system for supplying hot water between 35 °C and 55 °C. The
required temperature can be selected via two touch keys. The heating power is
controlled electronically in order to obtain and roughly maintain the set
temperature. The flow rate can be reduced via the control knob in order to
maintain the preset temperature when the maximum heating power (rated power) is
reached.
Description:
- Compact, electronically controlled instantaneous water heater
- Tubular heating system in copper tank
- Closed-outlet design with safety temperature limiter
- Heating power controlled electronically in accordance with feed temperature and flow rate
- Control panel with LED indicator for setting the temperature between 35 °C and 55 °C
- Control knob for reducing the flow rate right down to zero
- Variable electrical connections
- Variable water connection for surface-mounted or flush-mounted installation
| Specifications: |
| Capacity: |
0.2 Liter |
| Type of system (max. static pressure): |
non-pressure, 0 bar |
| Heating System: |
tubular heating element |
| Nominal rating/-loading at 1/N/PE ~ 220V: |
6.0 kW/27.3 A |
| Nominal rating/-loading at 1/N/PE ~ 230V: |
6.6 kW/28.7 A |
| Nominal rating/-loading at 1/N/PE ~ 240V: |
7.2 kW/30.0 A |
| Required cable minimum: |
3 x 4.0 mm² |
| Switch-off flow: |
2.0 l/min |
Maximum temp rise at nominal rating 230V and
flow of 4 l/min:
flow of 5 l/min:
flow of 6 l/min:
flow of 7 l/min:
flow of 8 l/min:
|
24°C
19°C
16°C
13°C
12°C
|
| Suitable for areas with cold water temps up to: |
20 - 30°C |
| Temperature control: |
Cold and 30 - 45°C |
| Water connection: |
G 1/2" for concealed or above work surface |
| Weight: |
2.2 kg |
| Dimensions (H x W x D): |
33 x 21 x 11cm |
| Class / Degree of protection (IEC 529): |
1 / IP 25 |
|
